Skip to product information
🔧 No Glue · No Drilling · 4.53″ Suction Pad

DentLift™ - Suction Dent Puller

DentLift™ - Suction Dent Puller

Press it on. Lock it. Pull the dent out.
✓Skip the Body ShopFor Shallow Dings
✓No Hot Glue KitNothing to Scrape Off
✓4.53″ Rubber SealGrips Smooth Paint
✓30-Day Money BackTry It Risk-Free
Early Black Friday Deal — 50% Off
⏰ EARLY BLACK FRIDAY SALE ENDING IN--:--
30DAY

The 30-Day Dent Guarantee

Try it on your dent for thirty days. If it isn't right for your dent, for any reason, message us within 30 days of delivery and we'll walk you through a return and a full refund.

  • 🔧No glue, no drilling, nothing to scrape off
  • ⭕4.53" (115 mm) thick rubber suction pad
  • 🔒Press-to-lock handle holds while you pull
  • 🪟Also lifts glass, tile and ceiling panels
🔥 Early Black Friday · 50% off · Free shipping
Will it work on my dent?
It works best on shallow, rounded dents on flat or gently curved panels, like door dings, hood dings and soft parking-lot dents. It won't pull sharp creases, dents on a body line, or dents where the paint is cracked.
Do I need glue or any tools?
No. DentLift holds by suction alone. Wipe the panel clean, pour hot water over the dent to soften it, then press the pad on and lock the handle. There's nothing to heat, glue or drill.
How long does a pull take?
Each pull takes seconds once the pad is locked on. Stubborn dents can take a few pulls, so plan on a few minutes per dent.
What size is it?
The rubber pad is 4.53 inches (115 mm) across and the puller stands 3.54 inches (90 mm) tall. Each order is one puller. Pick the 2-pack above to get the second one at half price.
What else can it lift?
Anything clean, smooth and non-porous: glass, tile, ceiling and access panels, smooth furniture, and phone screens during a repair.
View full details

Pop Out Door Dings Without a Body Shop Visit

A shallow ding doesn't need an appointment. Press DentLift's 4.53-inch rubber pad flat over the dent, press the handle to lock the seal, and pull straight back. On shallow, rounded dents in smooth paint, that one pull can bring the panel back out. There's no glue tab to set and no residue to clean off after.

A Thick Rubber Seal That Holds While You Pull

The black rubber pad closes off a 4.53-inch circle against the panel. Press the handle and the center of the pad draws up, so the cup locks on while you pull. Wipe the panel clean first, since grit under the rim is what breaks a seal. Pouring hot water over the dent softens the panel before the pull.

One Grip for Dents, Glass, Tile and Panels

The grip that pulls a dent also lifts flat, slick surfaces. Carry glass and tile, set floor tiles, lift out ceiling and access panels, move smooth furniture, or lift a phone screen during a repair. If the surface is clean, smooth and non-porous, DentLift can hold it.

HOW IT WORKS

Place. Press. Pull.

Three steps from the box to a smoother door.

1

Place it

Wipe the panel clean, pour hot water over the dent, and center the 4.53" pad on it.

2

Press to lock

Push the handle down. The pad locks onto the panel and holds while you pull.

3

Pull it out

Pull straight back. Stubborn dents can take a few pulls. It lifts off clean when you're done.

THE HONEST COMPARISON

Only one pulls a ding at home with nothing to clean up

No glue, no appointment, and a price you pay once.

DentLiftHot-glue dent kitsBody shop repair
No glue or residue to clean off✓×✓
Do it at home, no appointment✓✓×
Cost per dent$29.95 onceVaries$150–$300
Ready for the next ding✓Needs refillsPay again
Also lifts glass, tile and panels✓××

Compared against typical categories, not any one named product. Body shop cost is typical paintless dent repair pricing per dent.

EARLY BLACK FRIDAY

Dinged door? Pull it out yourself.

Get DentLift, 50% Off

Free shipping · 2nd one half price · 30-Day Money-Back Guarantee

FAQ

Any last questions?

Will it fix my dent?

DentLift works best on shallow, rounded dents on flat or gently curved panels, like door dings, hood dings and soft parking-lot dents. It won't pull sharp creases, dents on a body line, or dents where the paint is cracked. If the whole rubber rim can't sit flat around the dent, it won't seal.

Is it safe on my paint?

It pulls with suction from a soft rubber pad, so there's no glue to peel off your clear coat. Clean the panel first so grit isn't trapped under the seal. Repainted or already-chipped areas can lift under any pull, so check those spots before you start.

Why won't it stick?

Suction needs a clean, smooth, flat surface. Wipe the area dry, make sure the whole rim touches the panel, and stay off humps near the wheel arches and body lines. Press the handle firmly to lock the seal before you pull.

How do I use it?

Clean the surface. Pour hot water evenly over the dent. Center the pad on the dent and press the handle to lock it. Pull straight back. Stubborn dents can take a few pulls.

What's in the box?

One DentLift suction dent puller with a 4.53-inch (115 mm) rubber pad, standing 3.54 inches (90 mm) tall.

What if it's not right for me?

You're covered by our 30-day money-back guarantee. Email us within 30 days of delivery, we'll send you return instructions, and you get a full refund once it's back with us.

When will it arrive?

We pack and ship your order as fast as we can, and you'll get a tracking link by email the moment it leaves.